Okay, so my friend thought it was a good idea to ram his four wheeler into my door... And my window was down and it blew up in my door
Tools you need:
• Philips screw driver
• Needle nose pliers
• Flat head screw driver
• Sockets and wrenches
Parts you need:
• a window
Removing:
• Take the screws holding the door panel out
• Take the little metal clip out of the window arm and pull that out
• Remove the door panel
• Now take the little bolts out holding the window assembly in
• Remove the whole assembly from the door
Prep:
• Vaccume out the glass from inside your door
• Take the new window out of it's assembly
Installing:
• Attach the new assembly in place and hand tighten it
• Slide the new window in and connect it to the assembly
• Tighten everything down
• Put the door panel on and screw it in
• Put the arm on and put the clip in
• Roll your window up and down a few times to make sure it works
• Then ur good to go
No comments:
Post a Comment