Putting in spark plugs and wires

Tools you need:

• A ratchet and corresponding sprak plug socket

Parts you need:

• 8 spark plugs
• 8 spark plug wires

Removal:

• Do one spark plug at a time
• Take the wire off the plug
• Remove the plug without breaking it
• Look up the gap specs to your truck and gap the spark plugs
• Now put the plug in and tighten it by hand
• Take the ratchet and tighten it until it gets snug, then tighten it a quarter turn
• Now pull that wire off the distributor and put a new one in replacement
• Do this same procedure all the way around